Nuances of Temperature Changes While Riding

Image by Shutterhack via Flickr

Riding a motorcycle truly utilizes all your senses. I have written about the sounds, smells and the effect of the sun while riding previously. Another one of the nuances of riding that I really enjoy is touch. You have a heightened feeling of temperature change as you ride.

While riding in a vehicle you are protected from the elements and will never notice the subtle changes in temperature that you can while riding a motorcycle. When standing, walking or running the changes are generally to slow to notice. There is nothing better while riding on a hot day than to take slight dip in elevation and feel a pocket of cooler breeze against your skin. I think that is one of my favorite things that I enjoy about riding.

If you ride on a regular basis you will pick up on patterns of temperature changes while you ride. This is because hot air rises and cold air sinks. If the road you are traveling suddenly takes a drop in elevation you generally can actually feel the drop in temperature as you descend. Since cold air seeks lower elevations, naturally you will find it along creeks and rivers. Of course, the opposite of this is true as well. In Texas you can sometimes feel these temperature changes on longer bridges and overpasses.

Another factor that comes into play is the location of cover. Trees and buildings also block the wind and as the day warms up they will hold the cooler air at bay. There is a small wooded area with a creek in it by my house and usually on a hot day I will feel a nice cool section of the road while riding through the area. I don’t know why it feels so invigorating but I guess it just makes you more cognisant that you are alive.

Some temperatures are just not comfortable and you better have the correct riding gear to compensate for it. Hot weather gear for summer, cold weather gear for winter and rain gear for the rain. It is fun to race a storm to your destination before it starts to rain, or to stay out in front of a storm. Tornadoes, lightning or hail is not something you wish to tangle with on the back of a motorcycle.

Having your senses bombarded with information is just one of the things that make riding a motorcycle so exciting and enjoyable. Feeling the temperatures change as you ride is quite exhilarating and is definitely one of the reasons I prefer to ride.

Ride on,
Torch

Scorpion EXO 1000 Full Face Helmet Review

Scorpion EXO 1000 Full Face Helmet Review

I had been riding with a half helmet now for quite some time. Riding with a HJC CS-2N half helmet in the cold or rain, which I did the previous winter, is quite challenging. So, this fall with cooler temperatures fast approaching, I really wanted to upgrade to a full face helmet. I saved up some money and used a coupon I picked up at the International Motorcycle Show and headed over to Cycle Gear to try on helmets. It too k me two trips and lots of reading, both online and in magazines, doing research in hopes of getting the most bang for my buck.

If you have never been to try on helmets it is an exasperating endeavor. Different brands fit different shapes of heads and the trick is to find one that fits your particular head shape and then find a model that has all the features you want. I tried on a bunch and settled on the Scorpion EXO 1000 Solid in Glossy Black.

Here are the stats from Scorpions website:

• Fiberglass/Kevlar™ Matrix Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection.


• AirFit® permits a rider to personalize helmet fit through air adjustable cheek pads.


• SpeedView® an internal retractable light smoke sun visor that eases eye strain instantly in varying light conditions without changing face shields, plus an EverClear® coating on both sides for a fog free ride.


• SpeedShift® quick-change shield system (patent pending): Easy, secure tool-less faceshield changes in ten seconds or less.


• EverClear® no-fog faceshield: Optically-correct shield with state-of-the art fog-free technology and anti-scratch hardened coating.


• KwikWick® moisture-wicking helmet liner and cheek pads: Breathable, easily removable and washable.


• Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet.


• Breath-deflector: Enhanced fog-free performance.


• Snell/DOT Certified.

Going down their list and commenting on features:

The helmet is not as quiet as I would expect for a full face helmet as far as wind turbulence is concerned, although my bike does have a windshield on it that may contribute to the wind noise. Keep in mind I ride a cruiser, not a sport bike.

The AirFit check pads I have never had to use. Of course, not being used to a full face the helmet, they felt tight on my cheeks to begin with.

The SpeedView internal sun shade has multiple issues. First it is not dark enough for the Texas sun and glare. It will fog up if deployed when cold blocking your vision. The shade deploys and retracts the opposite way you would expect. Moving the lever down moves it down and up moves it up, instead of the natural way a lever should work which makes it extremely unintuitive to use. It also does not come down far enough leaving a line across your viewing area and not dimming the lower half making it hard on your eyes. This may not be so bad if you ride in the sport bike position. Lastly it also has distracting reflections on the sides in your peripheral vision that makes you think something is inside your helmet when vehicles drive by. I found this last issue the most distracting and annoying.

I have not used the SpeedShift quick-change shield system as of yet.

As with most face shields the EverClear no-fog shield still fogs. I used Fog Off and left the lower and upper center vent open all winter. Also the Optically correct lens still distorts your vision around the edges.

The KwickWick liner seems to do its job just fine. I have been using a helmet liner on my head first before putting the EXO 1000 helmet on to protect it from my wet hair and small amount of hair gel I use in the morning before commuting to work.

The ventilation system appears to work just fine, although I have not tried it in the Texas Summer time with all the vents opened up. Still the thought of a full face helmet in the summer stifles my imagination.

I am sure the Breath-deflector must help some, but I’m not convinced it does a whole lot to stop fogging.

I like the fact that it is both Snell and DOT approved.

Transitioning from a half helmet a full face helmet does take some getting used to. It can tend to make you feel slightly claustrophobic, although your head, and especially your face, feels much more protected and secure, which it is. The pressure on your cheeks is different but after wearing for a season the helmet conforms to your face as it breaks in. a full face helmet is warmer when it is cold outside and extremely nice to have when riding in the rain. You will still need some extra protection for your neck when it is real cold.

A full face does make the ride a lot quieter blocking out a lot of the bike and traffic noise. It also restricts your peripheral vision some and you will find yourself having to turn your head farther to make sure lanes are clear before changing. The visor lock lever is too small, too easy to accidently lock and not glove friendly. Most of the air vents can be opened and closed with gloves on once you get the feel for their location.

The fit and finish of all the materials is stellar. The inside is extremely comfortable. The chin strap is unobtrusive and easy to use with a snap for the loose end. Thankfully, when it was cold, there was not a lot of air leaking up from the neck area.

For its first season of use the Scorpion EXO 1000 performed as expected. Aside from some operator error it did its job just fine. It came with a helmet bag and you can order a Scorpion reflective helmet sticker band if you can find someone with it in stock online. Torch gives the Scorpion EXO 1000 a M.M.M Rating of 9.0 on a scale of 1-10.

Ride on,
Torch

Cold Riding Hands are Sluggish Riding Hands

River Road Cheyenne Cold Weather Gloves Review

This December my fingers were really getting cold during my morning commutes to work. I had been wearing a pair of inexpensive leather gloves purchased at Wal-Mart that had a thin Thinsulate liner. They worked great for driving a cage and if you were out of the wind. On a cold winter’s day though, at any speed over 40 mph, the cold wind sliced right through the seams. These gloves were not designed for motorcycling. I needed a pair of cold weather gloves.

I was off for the Christmas and New Years holidays and taking some vacation time from work and decided to take my V-Star in to get the front tire replaced. So, I was browsing my local Bikers Bay store while they were mounting a new front tire on my Mistress early on a Saturday morning. I looked at the gloves rack and found the River Road Cheyenne Cold Weather Gloves. The pricing was fair so I tried a pair on. They fit well despite my large hands although they sure felt bulky as all cold weather riding gloves will. I bought them and a neoprene face mask when my bikes front tire installation was complete.

The Cheyenne Cold Weather Gloves by River Road got their first trial as soon as my vacation and holiday time was up and it was time to get back to work. These gloves had a reinforced leather palm with good grip traction. The back side of the glove is made of a durable looking textile material. They have a breathable windproof Hipora liner they claimed was waterproof. These gloves are also equipped with a Thinsulate layer for warmth as well. They have two hook and loop adjustable fasteners one for the wrists and another for the cuffs. This makes them very adaptable. On top of that, they have reflective piping in several places on the seams for safety.

I have now ridden with them through our short Texas winter. These gloves kept my hands and wrist warm down to about 35 degrees Fahrenheit at 60+ mph. If it gets colder than that your fingers will still start to get cold. I would recommend a thermal glove liner to go with them when riding in temperatures freezing or below. I will invest in a pair of these for next winter. The gloves do an excellent job of blocking the wind. Finally, I also had the chance to wear them in the rain. I had my doubts, but the Cheyenne Cold Weather Gloves are indeed water proof. These River Road Gloves in conjunction with my frogg toggs kept me completely dry. The fact that I had dry and warm hands really impressed me.

The bulkiness of the gloves does have its cons, but the pros far outweigh them. If you have ever been caught in the cold without gloves, or just too lazy to pull over and put them on, and had to ride, you know what I mean. It takes a little adjusting to, to ride and use your motorcycles controls with the gloves on. The hardest thing to get used to for me was the starter button. However, I found that if I just kept moving my thumb around it would eventually make contact. They have held up good for the first winter riding season, although some may debate that Texas really does not have a winter season. Torch gives the River Road Cheyenne Cold Weather Gloves a M.M.M Rating of 9 on a scale of 1-10.

Ride on,
Torch