Kuryakyn X-Tension Highway Peg Mount Review

Kuryakyn X-Tension Highway Peg Mount Review

One of the first modifications I did to my V-Star 1100 Classic “Mistress” was to add some front pegs. At 6’2” I needed a way to stretch out my legs on longer rides. I had really wanted to get some Lindby Custom Linbars, still do, but funds were not available. So I started looking at front pegs to add to my bike to stretch out and rest my tired dogs on.

In researching for front pegs I decided I wanted some that could be folded up out of the way when not in use, rather than the stationary kind. Looking online I ran across the Kuryakyn X-Tension Highway Peg Mounts on the Kuryakyn website. I think I looked there because several other add-ons on my V-Star were from Kuryakyn. I honestly don’t remember where I ordered them from, but I ordered them online from an online store that had a good price. They arrived safely packed in foam peanuts several days after they were ordered.

The Kuryakyn X-Tension Highway Peg Mounts measure 4 ½” long and have a 1 ¼” offset which allows the reach adjustment to be fine tuned for the rider. The metal is really stout and fully chromed. Another feature I really liked was that the actual foot landing pad is thicker on these pegs, not being just a post. This gives the foot more purchase area. The pad is also equipped with floating rubber grip strips. These peg mounts allow for the peg to be folded up when not in use.

Installation is straight forward and required no special tools, just normal SAE sockets or wrenches most folks have in their garage. Here we go again with SAE nuts and bolts for a metric bike. I mounted them right onto the front frame down-tubes. They have to be mounted high enough up that they do not interfere with the operation of the rear brake pedal on the right side and the shifter on the left. Do not forget to use the included locking washers.

The hardest part about installation is getting them mounted evenly from side to side on height and angle. You also have to tighten the bolt at the pivoting point to the right tension so that they will stay up when put up. It probably took less than an hour to install them.

Having an extra place to put your feet on long ride is well worth it. With my backrest on the Corbin seat and my feet up I feel like I am riding a recliner down the freeway. You can use the pegs with the toe or heel of your shoe or boot. Alternatively, you can just rest the whole back of your foot up on top of the peg. This gives you multiple choices on long rides when you need to move around for comfort.

I have not had any issues with the Kuryakyn X-Tension Highway Peg Mounts. I will warn you Chromaholics that it is painstaking to clean the tops of the pegs between the rubber traction inserts. I have found the easiest way is to use the very edge of a soft cleaning towel. You have to go back and forth like you are shining shoes, between the rubber inserts. Torch gives the Kuryakyn X-Tension Highway Peg Mounts a M.M.M. rating of 9.5.

Ride on,
Torch